Select the fields you want to display.
Facility: LSBC
Name Model Description External Rate Internal Rate
Plate reader photo Plate Reader Perkin Elmer Victor3 1420-050

Perkin Elmer Victor3 1420-050 multilabel plate reader, 1-1536 wells, top/bottom fluorescence intensity, visible absorbance (340-800nm), UV absorbance (260nm/280nm), luminescence, linear/orbital/double orbital shaking, ambient temperature to 45°C. 

Primarily used for quantitative analysis of diverse biological assays…

$135/hr assisted
$105/hr unassisted
pXRD photo Powder X-ray diffraction Bruker AXS D8 Focus

Bruker AXS D8 Focus powder diffractometer with Cu source (1.54Å) and scintillation counter detector. 

Primarily used to acquire powder diffraction spectra of bulk crystalline materials and to confirm/infirm crystallinity.

XRD Commander (acquisition) and DIFFRAC.EVA (processing/…

$110/hr assisted
$75/hr unassisted
qPCR photo Quantitative Polymerase Chain Reaction (qPCR) Applied Biosystems 7500

Applied Biosystems 7500 Real-time PCR, 96 well plate.

Primarily used for qPCR. 

7500 software

$135/hr assisted
$105/hr unassisted
sXRD Photo Single Crystal X-ray diffraction (sXRD) Bruker AXS Kappa Apex II

Bruker AXS Kappa Apex II single crystal diffractometer, Mo source (0.71Å), Apex II CCD detector, and cryostream sample cooling. 

Primarily used for crystal structure determination of small molecules from single crystals.  Not a walk-up instrument – requires expert crystallographer assistance (MacDonald).

Pricing determined by project needs
TGA Photo Thermogravimetric Analyzer (TGA) Netzsch 209 F1 Libra

Netzsch 209 F1 Libra TGA (thermogravimetric analysis), ~35°C to 1000°C, requires Al2O3 crucibles. 

Primarily used for quantitative characterization of diverse solids. 

Proteus software

$135/hr assisted
$105/hr unassisted
TXRF Photo Total Reflection X-ray Fluorescence Spectrometer (TXRF) Bruker AXS S2 PicoFox

Bruker AXS S2 PicoFox TXRF, Mo source, XFlash silicon drift detector, 25 sample changer. 

Primarily used for quantitative and semi-quantitative multi-element microanalysis of solutions at ppb to % working concentration. 

Spectra software

$135/hr assisted
$105/hr unassisted
UV-Vis photo Ultraviolet - Visible Spectrometer (UV-Vis) Thermo Scientific Evolution 300

Thermo Scientific Evolution 300 UV-Vis spectrophotometer, 190-1100nm, dual beam, 1cm cuvettes. 

Primarily used for quantitative analysis of solutions. 

VisionPro software

$135/hr assisted
$105/hr unassisted
Facility: PracticePoint
Name Model Description External Rate Internal Rate
C-Arm Fluoroscope C-Arm Fluroscope Siemens Arcadis Orbic 3D

C-Arm fluroscope with 3D cone-beam CT imaging option. Field of view is about 12cm. Fluroscope cannot be used for human subject imaging.

y y
Haas CM-! CNC Mill HAAS CM-1

3-Axis CNC Mill with 12"X10"X14" workspace, 20 tool changer, and 30,000 RPM spindle.

Fiber optic temperature sensor Fiber Optic Temperature Sensors OSENSA FTX-300-LUX+

Fiber optic temperature sensors and DAQ. 3 sensors with 10m fiber extensions allow the sensors to be routed into the MRI room through a wave guide for MR safe noise-free temperature measurements during studies.

Olympus CV 180 Flexible Endoscope Video Processor and Light Source Olympus CV-180 and CLV-180

Video processor for Olympus 180 series flexible endoscopes. Backwards compatible with some older Olympus scopes. No endoscopes are currently available through PracticePoint, research teams must source the scope applicable to their research

NNL Headset fMRI Vision system NordicNeurolab VisualSystem HD

A heads up display and headphone system for presenting visual and auditory stimuli to subjects in the MRI machine. Combined with the fMRI pulse sequences on the GE scanner, stimuli can be presented to subjects and neural response based on BOLD signal can be measured.

Force Plate Force Plates AMTI OPT400600

2 force plates with force/torque measurement. The OPT400600 integrate with the vicon motion capture system to provide measurements of center of pressure and ground reaction forces. Mounted flush with the floor of the motion capture lab using an AMTI rail mounting system.

y y
Formlabs Form 2 Formlabs Form 2 Formlabs Form 2

Stereolithography 3D printer with 145X145X175mm build volume and minimum layer height of 25 microns. A range of materials with different appearances and material properties are available depending on application.

Universal Laser Laser Cutter Universal Laser Systems PLS6.150D

150W dual laser sysem with 32" x 18" x 8.5" workspace. This laser cutter is capable of processing acrylic, wood, and other select plastics.

Markforged Mark Two Markforged Mark Two Markforged Mark Two

FDM 3D printer with 320X132X154mm build volume and minimum layer height of 100 microns. The printer uses a proprietary "Onyx" base material composed of nylon impregnated with chopped carbon fiber. Layers of carbon fiber, fiberglass, or kevlar fiber reinforcement can be added between layers.

Markforged Metal X Markforged Metal X Markforged Metal X

Metal 3D printing process composing of an FDM 3D printer, a wash station, and a sintering oven. Parts can be printed with stainless steel, inconel, tool steel, or copper.

Vicon Motion Capture Motion Capture System Vicon Vantage V5

10 Camera marker-based motion capture system with sub mm accuracy and full room capture volume. Installed in purpose-built motion capture lab and integrated with other biomechanics tools

y y
MRI Machine MRI Machine GE Signa Premiere

3T MRI with 70cm bore. Full suite of imaging coils and scan sequence options. The MRI can be used for IRB approved human subject imaging, device testing, and phantom imaging.

y y
Stryker Endoscope System Rigid Endoscope Camera System Stryker HD-1288

HD Camera head and light source for use with rigid endoscopes. A small selection of standard rigid scopes are available for use.